+86-571-89935095 he@hzomega.com
Contact Us
Add: No.502 Jingui Mansion No.387 Gudun Road, Hangzhou, Zhejiang, China
Mob: +8613606617154
Tel: +86-571-89935095
Fax: +86-571-89935094
E-mail: he@hzomega.com
Home > Knowledge > Content
How to debug noise in industrial sewing machines
Dec 25, 2018

In general, the noise fault of knitting machine can be divided into many cases according to the mechanism of noise, and different treatment methods should be adopted for the different mechanism parts of noise generation.

For example: rocker bearing loosening to produce noise, to see if the nose is not flat, rack noise, that depends on whether the rack of the top screws, conical screws and cone holes due to wear and tear between the coordination gap is too large, the rack is not stable and other reasons cause the rack to produce noise. As long as the specification requirements to reinstall the rack, reduce the coordination gap, clearance can not be adjusted to replace the new parts, flattening the rack, re-release the mechanism can eliminate the noise failure caused by the rack.